Difference between revisions of "DirectActionsWML"

Revision as of 01:01, 8 April 2011

Direct actions

Direct actions are actions that have a direct effect on gameplay. They can be used inside of events.

The following tags are actions:

[endlevel]

Ends the scenario.

result: before the scenario is over, all events with name=result are triggered. The message result_message with the heading result_heading (see LanguageWML) are displayed. If result=victory, the player progresses to the next level; if result=defeat, the game returns to the main menu. These last two are rarely used: result=continue behaves identically to result=victory except the player's gold is not reduced to 80%, and it does not bring up a "Victory" message or the gold changing message (since it doesn't change); result=continue_no_save works similarly, except the player is not asked whether to save the game, and is taken directly to the next scenario without any messages. Template:DevFeature: All values for result=... except victory and defeat are being discarded in favor of modifying [endlevel] behaviour with single keys.

Unless result=defeat, the following keys can also be used:

bonus: whether the player should get bonus gold (maximum possible gold that could have been earned by waiting the level out). The default is bonus=yes.
carryover_report: whether the player should receive a summary of the scenario outcome, the default is carryover_report=yes.
save: whether a start-of-scenario save should be created for the next scenario, the default is save=yes. Do not confuse this with saving of replays for the current scenario.
linger_mode: If ...=yes, the screen is greyed out and there's the possibility to save before advancing to the next scenario, the default is linger_mode=yes.
reveal_map: (Multiplayer only) (Default is 'yes') If 'no', shroud doesn't disappear when game ended. Template:DevFeature1.9
next_scenario: (default specified in [scenario] tag) the ID of the next scenario that should be played. All units that side 1 controls at this point become available for recall in next_scenario.

When the result is "victory" the following keys can be used:

carryover_percentage: by default 80% of the gold is carried over to the next scenario, with this key the amount can be changed.
carryover_add: if true the gold will be added to the starting gold the next scenario, if false the next scenario will start with the amount of the current scenario (after taxes) or the minimum in the next scenario. Default is false.
music: (default specified in [scenario] or [game_config] tags) a comma-separated list of music tracks from which one will be chosen and played once after any events related to the end of level result are executed; by default, victory_music is used on victory, and defeat_music on defeat.
end_text: Text that is shown centered in a black screen at the end of a campaign. Defaults to "The End". Note that this has cumulative effects over the campaign - it persists even if the endlevel does not trigger the end of the campaign. See also CampaignWML.
end_text_duration: Delay, in milliseconds, before displaying the game credits at the end of a campaign. In other words, for how much time end_text is displayed on screen. Defaults to 3500. Note that this has cumulative effects over the campaign - it persists even if the endlevel does not trigger the end of the campaign. See also CampaignWML.

[unit]

Places a unit on the map. For syntax see SingleUnitWML.

(Hint: Use the GENERIC_UNIT macro)

to_variable: spawn directly into a variable instead of on the map.

[recall]

Recalls a unit. The unit is recalled free of charge, and is placed near the leader.

StandardUnitFilter: the first matching unit will be recalled. If no units match this tag is ignored. Do not use a [filter] tag. If a comma separated list is given, every unit currently considered for recall is checked against all the types (not each single one of the types against all units).
x,y: the unit is placed here instead of next to the leader.
show: yes/no, default yes: whether the unit is animated (faded in) or instantly displayed
fire_event: Template:DevFeature1.9 boolean yes|no (default no); whether any according prerecall or recall events shall be fired. In pre-1.9.3 these events are all automatically fired and it can't be turned off.
check_passability: Template:DevFeature1.9 (boolean yes|no, default yes): If yes, checks for terrain passability when placing the unit (a nearby passable hex is chosen). Before 1.9 this key is always "no".

[teleport]

Teleports a unit on map. (Hint: Use the TELEPORT_UNIT macro)

[filter]: StandardUnitFilter the first unit matching this filter will be teleported.
x,y: the position to teleport to.
clear_shroud: should shroud be cleared on arrival
animate: should a teleport animation be played (if the unit doesn't have a teleport animation, it will fade out/fade in)
ignore_passability: Template:DevFeature normally, units will not be teleported into terrain that is impassable for them. Setting this attribute to "yes" permits it. Template:DevFeature1.9Renamed to check_passability (default yes).

(Note: There is also a ability named teleport, see AbilitiesWML.)

[terrain_mask]

Changes the terrain on the map. See TerrainMaskWML.

[terrain]

Changes the terrain on the map.

terrain: the character of the terrain to use. See TerrainCodesWML to see what letter a type of terrain uses.
x,y: the position (or range of positions) to change. Template:DevFeature1.9: [terrain] accepts a StandardLocationFilter. This StandardLocationFilter's terrain= key is used for the new terrain, filtering by terrain can be done with a nested StandardLocationFilter: [and]terrain=terrain_string_to_be_filtered_for.
layer: (overlay|base|both, default=both) only change the specified layer.
replace_if_failed: (default=no) When replacing just one layer failed, try to replace the whole terrain. If terrain is an overlay only terrain, use the default_base as base layer. If the terrain has no default base, do nothing.

[gold]

Gives one side gold.

amount: the amount of gold to give.
side: (default=1) the number of the side to give the gold to; Template:DevFeature1.9 takes a comma-separated list as of 1.9.5.

[unstore_unit]

Creates a unit from a game variable, and activates it on the playing field. This must be a specific variable describing a unit, and may not be an array -- to unstore an entire array, iterate over it. The variable is not cleared. See also [store_unit], [while] and [clear_variable]. Note units with a negative amount of hitpoints will be unstored with 1 hitpoint.

variable: the name of the variable.
find_vacant: whether the unit should be placed on the nearest vacant tile to its specified location. If this is set to 'no'(default), then any unit on the same tile as the unit being unstored will be destroyed.
check_passability: Template:DevFeature1.9 (boolean yes|no, default yes): If yes, checks for terrain passability when placing the unit. This key has no effect if find_vacant=no (no check performed then). Before 1.9 this key is always "no".
text: (translatable) floating text to display above the unit, such as a damage amount
red, green, blue: (default=0,0,0) the color to display the text in. Values vary from 0-255. You may find it convenient to use the {COLOR_HARM} or {COLOR_HEAL} macro instead. (Use {COLOR_HARM} or {COLOR_HEAL} instead of the whole red,green,blue= line.)
advance: (default=true) if true the unit is advanced if it has enough XP. When modifying XP make sure to do it from inside a synchronized event or it may lead to OOS errors especially when several advancement paths exist. Note that advance and post advance events are called, so infinite loops can happen.
fire_event: Template:DevFeature1.9(boolean yes|no, default no) Whether any advance/post advance events shall be fired if an advancement takes place, no effect otherwise. Before 1.9 this is always "yes".
x ,y: override unit location, "x,y=recall, recall" will put the unit on the unit's side's recall list.

[allow_recruit]

Allows a side to recruit units it couldn't previously recruit.

type: the types of units that the side can now recruit.
side: (default=1) the number of the side that is being allowed to recruit the units Template:DevFeature1.9 side= can be a comma-separated list

[disallow_recruit]

Prevents a side from recruiting units it could previously recruit.

type: the types of units that the side can no longer recruit.
side: (default=1) the number of the side that may no longer recruit the units. Template:DevFeature1.9 side= can be a comma-separated list

[set_recruit]

Sets the units a side can recruit.

- recruit: the types of units that the side can now recruit.
- side: (default=1) the number of the side that is having its recruitment set. Template:DevFeature1.9 side= can be a comma-separated list

[modify_side]

Modifies some details of a given side in the middle of a scenario. The following listed properties are the only properties that [modify_side] can affect!

side: (default=1) the number of the side that is to be changed.
income: the income given at the begining of each turn.
team_name: the team in which the side plays the scenario.
user_team_name: a translatable string representing the team's description. This has no effect on alliances. Defaults to team_name.
gold: the amount of gold the side owns.
village_gold: the income setting per village for the side.
controller: the identifier string of the side's controller. Uses the same syntax of the controller key in the [side] tag.
fog: a boolean string (yes/no) describing the status of Fog for the side.
shroud: a boolean string describing the status of Shroud for the side.
hidden: a boolean string specifying whether side is shown in status table.
[ai]: replaces a side's AI parameters with the new specified ones. Uses the same syntax described in AiWML.
switch_ai: Template:DevFeature replaces a side ai with a new AI from specified file(ignoring those AI parameters above). Path to file follows the usual WML convention.
share_maps: Template:DevFeature change the share_maps side attribute. Be sure to use shroud=yes for that side and have it as an ally
share_view: Template:DevFeature change the share_view side attribute. Be sure to use fog=yes for that side and have it as an ally

[modify_turns]

Modifies the turn limit in the middle of a scenario.

value: the new turn limit.
add: if used instead of value, specifies the number of turns to add to the current limit (can be negative).
current: changes the current turn number after applying turn limit modifications, if any. It is possible to change the current turn number to a greater one than the current only; also, it is not possible to change the turn number to exceed the turn limit.

[capture_village]

Changes the ownership of a village.

side: the side that takes control of the village. This side needs to have a leader (canrecruit=yes). If the side key is not given, the village will become neutral.
x, y: the location of the village. Can be a comma-separated list and/or location ranges. Template:DevFeature1.9: [capture_village] accepts a full SLF; all village locations matching the filter are affected.

[kill]

Removes all units (including units in a recall list) that match the filter from the game.

StandardUnitFilter: Selection criterion; do not use a [filter] tag.
animate: if 'yes', displays the unit dying (fading away).
fire_event: if 'yes', triggers any appropriate 'die' events (See EventWML). Note that any 'last breath' and 'die' events triggered by this are executed immediately, interrupting the current event and thus causing the x1, y1, x2, and y2 variables to be reset for that 'die' event, which in turn causes those variables to be invalid for the remainder of this event. In the stable version, the variable second_unit in each of these die and last breath events is always the same as the variable unit (the dying unit). Note that events are only fired for killed units that have been on the map (as opposed to recall list).
[secondary_unit] Template:DevFeature1.9 with a StandardUnitFilter as argument. Do not use a [filter] tag. Has an effect only if fire_event=yes. The first on-map unit matching the filter becomes second_unit in any fired die and last breath events. If an on-map unit matches and if there are several units killed with a single [kill] tag, second_unit is this same unit for all of them. If no on-map unit matches or [secondary_unit] isn't present, the variable second_unit in each of the die and last breath events is always the same as the variable unit (the dying unit).

[move_unit]

Template:DevFeature1.9; works like the MOVE_UNIT macro.

StandardUnitFilter as argument; do not use a [filter] tag. All units matching the filter are moved. If the target location is occupied, the nearest free passable location is chosen. All target locations passed (see below) need to be passable hexes for the particular moved units.
to_x (unsigned integer): The units are moved to this x coordinate. Can be a comma-separated list, in which case the unit follows this given path during the move.
to_y (unsigned integer): The units are moved to this y coordinate. Can be a comma-separated list.
fire_event (optional, boolean yes|no, default no): Whether any according moveto events shall be fired. The target location ($x1, $y1 in the event) may not be the same location that the unit was tried to be moved to, if the original target location is occupied or impassable.
check_passability (boolean yes|no, default yes): Whether the terrain the unit is moved to should be checked for suiting the unit. (If it does not, a nearby suitable hex is chosen.)

[modify_ai]

Changes the AI for a specified side. See Customizing_AI_in_Wesnoth_1.8#.5Bmodify_ai.5D_tag

[modify_unit]

Template:DevFeature1.9; works similar to the MODIFY_UNIT macro.

[filter] with a StandardUnitFilter as argument. All units matching this filter are modified. Matches on recall list units too.
Accepts generally the syntax inside of wml unit variables created by [store_unit] which can be viewed in a savefile or by using the :inspect command. Can add traits with immediate effect. Cannot remove things. Subtags with the same name must be written in the correct order to match them with the tag they are supposed to modify.

example usage (see also the test scenario):

[modify_unit]
    [filter]
        type=Troll Rocklobber
    [/filter]
    hitpoints=10
    [modifications]
        [trait]
            # first trait is unmodified
        [/trait]
        {TRAIT_HEALTHY}# second trait is replaced with the healthy trait
    [/modifications]
[/modify_unit]

The unit which is currently modified is accessible via $this_unit, e.g. hitpoints = "$($this_unit.hitpoints / 2)" to set the hitpoints of all units to half of their particular maxima. This this_unit variable is independent from the this_unit variable available in the SUF used to determine which units to modify (first all matching units are gathered, and then all those are modified).

note: The syntax allowed is somehow vague. Just try things and possibly correct/add/modify this documentation. (a forum thread discusses some related issues).

[transform_unit]

Template:DevFeature1.9; transforms every unit matching the filter to the given unit type. Keeps intact hitpoints, experience and status. If the unit is transformed to a non-living type (undead or mechanical), it will be also unpoisoned.

StandardUnitFilter: do not use a [filter] tag.
transform_to: the unit type in which all the units matching the filter will be transformed. If missing, the units will follow their normal advancement.

[petrify]

Template:DevFeature1.9(This tag did never exist until r47553 (from 1.9.3 on), although it was already documented.)

StandardUnitFilter as an argument. Do not use a [filter] tag. All units matching this filter are petrified. Recall list units are included.

[unpetrify]

StandardUnitFilter as an argument. Template:DevFeature1.9: Do not use a [filter] tag. All units matching this filter are unpetrified Template:DevFeature1.9: recall list units included.

[object]

Gives some unit an object and removes all items on the tile the unit is on.

id: (Optional) when the object is picked up, a flag is set for id. The object cannot be picked up if a flag for id has been set. This means that any object with an id can only be used once, even if first_time_only=no is set for the event. This restriction is per level. In a campaign objects with the same id can be assigned once per level.
[effect]: one or more effect elements may be listed. See EffectWML for a description of [effect].
duration: if 'level', effects only last until the end of the level (note : 'level' is the scenario, so this doesn't mean it last until the unit levels-up).
[filter] with a StandardUnitFilter as argument. The first unit found that matches the filter will be given the object. If no unit matches the filter, then a message is displayed and the object is not removed.
[then]: a subtag that lets you execute actions if the filter conditions are met. The most common action that should be inside here is a [removeitem] tag, but you could probably put any tags that otherwise work in a [then] tag.
silent: whether or not messages should be suppressed. Default is "no".
image: the displayed image of the object.
name: (translatable) displayed as a caption of the image.

description: (translatable) displayed as a message of the image.
cannot_use_message: (translatable) displayed instead of description if no unit passes the filter test.
If you do not supply a filter, the object action will be applied to a unit at the location of the moveto event. Currently this isn't recommended as it is not clear that this will continue working this way. Instead it is better to explicitly include a location filter.
The object action does not act on units in the recall list. There is a feature request in to allow this, but it is not clear whether or not it will be accepted.

[remove_shroud]

Removes some shroud from the map for a certain side (only relevant for sides that have shroud=yes).

side: (default=1) the side for which to remove shroud. Template:DevFeature1.9 takes a comma-separated list as of 1.9.5.
StandardLocationFilter: the range of tiles for which shroud should be removed

[place_shroud]

Places some shroud on the map for a certain side (only relevant for sides that have shroud=yes).

side: (default=1) the side for which to place shroud. Template:DevFeature1.9 takes a comma-separated list as of 1.9.5.
StandardLocationFilter: the range of tiles on which shroud should be placed

[allow_undo]

Allows the player to undo the event that this tag is inside. Has an effect only inside moveto events. If the move is undone, only the position of the unit will be restored; any altered variables or changes to the game will remain changed after the move is undone. It is up to the scenario designer to avoid abusing this command.

Technically, if [allow_undo] is inside an [event] with first_time_only=yes (the default setting), and the user undoes the event, then the state of the game has changed in this way: the event will not fire a second time, even though the user undid the move the first time.

[heal_unit]

Heal a unit. The variable $heal_amount will be set to the exact number of points healed (i.e can be lesser than the parameter amount if the unit is fully healed). Template:DevFeature1.9 $heal_amount contains only the number of hitpoints the first unit that was found got healed (no change, actually).

[filter]: StandardUnitFilter the first unit matching the filter will be healed. If no filter is supplied, it is tried to take the unit at $x1, $y1. Template:DevFeature1.9 All matching on-map units are healed.
[filter_second]: StandardUnitFilter all the units matching the filter and having the heals ability will have their animation played (if animate is set to true) Template:DevFeature1.9...for each of the units healed.
amount: (integer, default full) the maximum points the unit(s) will be healed. Can't set below 1 or above max_hitpoints. If "full", sets hitpoints to max_hitpoints. Before 1.9 the default is 0.
animate: a boolean which indicate if the healing animations must be played. (default no)
moves: Template:DevFeature1.9 (integer, default 0) The maximum current movement points the units will be "healed". Can't set below 0 or above max_moves. If "full", sets moves to max_moves.
restore_attacks: Template:DevFeature1.9 (boolean, default no) Whether the units' attacks_left should be reset to their max_attacks (usually 1).
restore_statuses: Template:DevFeature1.9 (boolean, default yes) Whether standard statuses should be reset to "no". This affects poisoned, slowed, petrified and unhealable. Before 1.9 this is always "no".

[harm_unit]

Template:DevFeature1.9Harms every unit matching the filter, for the specific damage amount.

[filter]: StandardUnitFilter all matching units will be harmed (required).
amount: the amount of damage that will be done (required).
alignment: (default neutral) applies an alignment to the damage, this means that if alignment=chaotic, the damage will be increased at night and reduced at day.
damage_type: if present, amount will be altered by unit resistance to the damage type specified.
kill: (default yes) if yes, when an harmed unit goes to or below 0 HP, it is killed; if no its HP are set to 1.
fire_event: (default no) if yes, when a unit is killed by harming, the corresponding events are fired.
animate: (default no) if yes, scrolls to each unit before harming it and plays its defense and death animations.
[secondary_attack]: sets the weapon against which the unit harmed will defend, to allow playing specific defense animations. Takes a weapon filter as argument, see FilterWML.
delay: if animate=yes, sets the delay (in milliseconds, default 500) between each unit harming.
variable: if present, the damage caused to the unit, altered by resistances, will be stored in a WML array with the given name, under the "harm_amount" key.
poisoned, slowed, petrified, unhealable: (default no) if yes, every harmed unit that doesn't already have such status will have it set.

[time_area]

How a day should progress in a given area. Everywhere not specified in a [time_area] tag is affected by the [time] and [illuminated_time] tags in the [scenario] tag.

StandardLocationFilter: the locations to affect.
TimeWML: the new schedule.
id: an unique identifier assigned to a time_area. Optional, unless you want to remove the time_area later. Can be a comma-separated list when removing time_areas, see below.
remove: (boolean) yes/no value. Indicates whether the specified time_area should be removed. Requires an identifier. If no identifier is used, however, all time_areas are removed.

[end_turn]

End the current side's turn. Template:DevFeature The current event is finished before the turn is ended. Also, if the current event (where the tag appears) has been fired by another event, that event (and the complete stack of other possible parent events) is ended before [end_turn] comes into affect. Also, events following the event stack that fired [end_turn] are not omitted (e.g. [end_turn] is used by a side turn event and a turn refresh event does something afterwards).

[replace_map]

Replaces the entire map.

map: Content of a wesnoth map file. example:

map="{campaigns/Heir_To_The_Throne/maps/01_The_Elves_Besieged.map}"

expand: if 'yes', allows the map size to increase. The expansion direction is currently always bottom-right.
shrink: if 'yes', allows the map size to decrease. If the map size is reduced, any units that would no longer be on the map due to its coordinates no longer existing will be put into the recall list.

[replace_schedule]

Replace the time of day schedule of the entire scenario. Template:DevFeature1.9

TimeWML: the new schedule.

[tunnel]

Template:DevFeature1.9

Create a tunnel between some locations, later usable by units to move from source hex to target hex (using the movement cost of unit on the target terrain). (source)

id identifier for the tunnel, to allow removing (optional).
remove: (boolean) yes/no value. If yes, removes all defined tunnels with the same ID (then only id= is necessary). (default: no)
bidirectional: (boolean) if yes, creates also a tunnel in the other direction. (default: yes)
always_visible: (boolean) if yes, the possible movement of enemies under fog can be seen. (default: no)
[source]: StandardLocationFilter the source hex(es) (required).
[target]: StandardLocationFilter the target hex(es) (required).
[filter]: StandardUnitFilter the units which can use the tunnel (required). Leave empty for "all units".

(Note: The tunnel tag can also be used inside the [teleport] ability, without remove= and id=).

Useful Macros

There are some predefined macros that you find useful for direct actions. You can find a complete list along with a detailed explanation of how they work here.

{MOVE_UNIT}: Moves a unit to another location in the map and the player sees the movement (unlike [teleport])
{FULL_HEAL}: Brings a unit to full HP
{LOYAL_UNIT}: Create a loyal unit
{MODIFY_TERRAIN_MASK}: Modify an area of terrain

@@ Line 153: / Line 153: @@
 The unit which is currently modified is accessible via $this_unit, e.g. hitpoints = "$($this_unit.hitpoints / 2)" to set the hitpoints of all units to half of their particular maxima. This this_unit variable is independent from the this_unit variable available in the SUF used to determine which units to modify (first all matching units are gathered, and then all those are modified).
-note: The syntax allowed is somehow vage. Just try things and possibly correct/add/modify this documentation. (a [http://forums.wesnoth.org/viewtopic.php?f=21&t=31676& forum thread] discusses some related issues).
+note: The syntax allowed is somehow vague. Just try things and possibly correct/add/modify this documentation. (a [http://forums.wesnoth.org/viewtopic.php?f=21&t=31676& forum thread] discusses some related issues).
 === [transform_unit] ===