Difference between revisions of "WesnothRepository"

From The Battle for Wesnoth Wiki
m
m (Browse the code)
Line 17: Line 17:
 
There are currently two main streams of development ("<dfn>branches</dfn>"): the '''master''' branch (1.13.x), and the '''stable''' branch (1.12.x). (1.10.x is now '''oldstable'''.) Most other branches are only used for a short time to do some testing without disturbing the main development.
 
There are currently two main streams of development ("<dfn>branches</dfn>"): the '''master''' branch (1.13.x), and the '''stable''' branch (1.12.x). (1.10.x is now '''oldstable'''.) Most other branches are only used for a short time to do some testing without disturbing the main development.
  
You can use a Web browser to view the source code at:
+
You can use a Web browser to view the source code at: '''[https://github.com/wesnoth/wesnoth <https://github.com/wesnoth/wesnoth>]'''
 
 
'''[https://github.com/wesnoth/wesnoth <https://github.com/wesnoth/wesnoth>]'''
 
  
 
== Download ==
 
== Download ==

Revision as of 03:16, 25 July 2015

[edit]Compiling Wesnoth

Platforms

The Battle for Wesnoth code-base is stored in a version control repository. Version control allows the entire development team to edit files concurrently. The version control software tracks revisions, stores a record of all edits, and prevents simultaneous editing from causing clashes. All changes are stored in the version control repository.

When a release is planned, the current set of the files in the repository is "frozen", given a version number, and shipped out to the world at large. Then, as files continue to be edited by the developers, the repository code advances past that point. The repository (or "repo") version is by definition the most up-to-date version of the code.

The Wesnoth repository is a Git repository and is hosted on GitHub: <https://github.com/wesnoth/wesnoth>.

Git

Git is the most widely used open-source version-control system. You can learn more about it at its website: <https://git-scm.com>.

Git replaced Subversion (SVN) as Wesnoth's version-control system in March 2013. Subversion had, itself, previously replaced an older program, Concurrent Versioning System (CVS), in 2005. These earlier systems have left a few traces in the version history which you might encounter; some older documentation and a few files refer to them.

Browse the code

There are currently two main streams of development ("branches"): the master branch (1.13.x), and the stable branch (1.12.x). (1.10.x is now oldstable.) Most other branches are only used for a short time to do some testing without disturbing the main development.

You can use a Web browser to view the source code at: <https://github.com/wesnoth/wesnoth>

Download

To clone a copy of the repository into a directory named "wesnoth", run this command:

git clone "https://github.com/wesnoth/wesnoth.git" wesnoth
There are other transport protocols, in addition to Hypertext Transfer Protocol Secure (HTTPS), over which one can clone a Git repository from GitHub, including:
  • Secure Shell (SSH) ("ssh://git@github.com/wesnoth/wesnoth.git", or "git@github.com:wesnoth/wesnoth.git"), which provides a bit more security, and can be more convenient for developers, but needs to be set up first (see the "Push access" section, below).
  • Git's native transport protocol ("git://github.com/wesnoth/wesnoth.git"), which may be somewhat faster than HTTPS (though GitHub uses a faster "smart" HTTPS transport), but is insecure and should be used (if one must use it) with caution (check the commit hashes!).

A more detailed explanation is available here.

FAQ

Q: The repository is about three gigabytes large, and my Internet connection is not stable enough to reliably download it. What should I do?

A: https://stackoverflow.com/questions/9268378/how-do-i-clone-a-large-git-repository-on-an-unreliable-connection

  1. Use a download manager to download the directory "https://github.com/wesnoth/wesnoth.git", in one or more sessions.
  2. Put this "wesnoth.git" directory, which is the internals of the Wesnoth repository, in a new, empty directory.
  3. Rename the "wesnoth.git" directory to ".git".
  4. Finally, run these commands in the directory that contains the ".git" directory:
> git remote add remote "https://github.com/wesnoth/wesnoth.git"
> git reset --hard HEAD

The first command links your local repository to the upstream repository; the second checks out a working tree (i.e., copies the files out of the ".git" directory into a form that you can use).


Q: I don't want any alternate branches or repository history. How could I avoid downloading that?

A: This simply requires a more elaborate command. For example, to only download the last revision of the 1.12 branch, and store it in a directory named "wesnoth-1.12-single-branch-test":

> git clone --branch 1.12 --single-branch --depth 1 "https://github.com/wesnoth/wesnoth.git" wesnoth-1.12-single-branch-test

Example results:

> git clone --branch 1.12 --single-branch --depth 1 "https://github.com/wesnoth/wesnoth.git" wesnoth-1.12-single-branch-test
Cloning into 'wesnoth-1.12-single-branch-test'...
remote: Counting objects: 18725, done.
remote: Compressing objects: 100% (17541/17541), done.
remote: Total 18725 (delta 1571), reused 7397 (delta 1004)
Receiving objects: 100% (18725/18725), 376.17 MiB | 171.00 KiB/s, done.
Resolving deltas: 100% (1571/1571), done.
Checking connectivity... done.
Checking out files: 100% (18593/18593), done.
> du -sh wesnoth-1.12-single-branch-test # "du" means "disk usage".
1.1G	wesnoth-1.12-single-branch-test

However, for development and testing, it is often better to have some of the repository history, so that you can quickly check out older versions of the repository to pin down a bug.

Push access

For push access (the capability to push changes from your local repository) to our upstream repository on GitHub, you must have an account on GitHub, which must be registered as part of the Battle for Wesnoth organization.

It may be convenient to use Git's Secure Shell (SSH) transport protocol, so that you needn't either enter your username and password each time you push commits, or insecurely store those credentials in an unencrypted configuration file. To use the SSH transport, you will need to generate an SSH key pair with a command like (on Unix descendent operating systems, including Linux distributions and Apple OS X, at least) this:

ssh-keygen -t rsa -b 15360 -f "<file>" -C "<your name>'s SSH key for GitHub"

On a typical Linux distribution or on Apple OS X, <file> would be, e.g., "~/.ssh/id-key-for-github".

Note that generating an SSH key pair can potentially take a while and be fairly CPU-intensive.

Once you have generated an SSH key pair, put the following into your SSH configuration file (on Unix descendent systems, this is generally "~/.ssh/config"):

Host github.com
	IdentityFile <file>

Then register the key with GitHub, by going to <https://github.com/settings/ssh>, selecting "Add SSH key", and pasting the contents of the public key file (<file>, but with a ".pub" extension) into the "Key" field.

Then, if you have not yet cloned the repository, clone it via SSH:

git clone "ssh://git@github.com/wesnoth/wesnoth.git" wesnoth

If you have already cloned the repository, you can set it to use SSH transfer:

git remote set-url origin "ssh://git@github.com/wesnoth/wesnoth.git"

Force-pushing policy

A forced push rewrites a branch tip to point to a new commit without checking first whether the new commit is a descendant of the current tip. This effectively allows you to rewrite the commit history of a branch, which may be useful when working with pull requests from your own personal fork.

git push --force fork <branch name>

However, for a public repository depended upon by more than a handful people like any of the Wesnoth repositories at <https://github.com/wesnoth>, force-pushing becomes a serious inconvenience that may have negative consequences in some cases, if history is lost in the process. For this reason, force-pushing to the upstream Wesnoth repositories is NOT allowed unless specifically authorized by the repository administrators in order to resolve an urgent issue.

Update

Do this from inside the wesnoth directory:

git pull

Reviewing your changes

Before committing, it's always wise to run:

git diff

and look at the output. Some kinds of mistakes that are hard to see embedded in all the code you have modified are more easily spotted in the isolated diff lines.

Generating patches

Under Git on a Unix-like operating system, you'll typically do

git format-patch HEAD~1..HEAD

or something similar; "HEAD~1" may be replaced by a hash or symbolic reference to any earlier revision. This will produce one or more patch files, numbered and ending with the extension ".patch". See PatchSubmissionGuidelines for more on how to get these merged into the public repository.

Push to your own fork

If you have an account on GitHub, you can fork the repository and add your fork as a remote of your clone.

git remote add fork git@github.com:YOUR_USERNAME/wesnoth.git

You can then push your branches to your fork:

git push fork branch_name

Or, if you want to push one branch in your local repository to another in the remote repository:

git push fork local_branch_name:remote_branch_name

You can then create pull requests from your branches in GitHub’s Web interface.

See Also