Difference between revisions of "Wesnoth AI"
(→Available AIs: add a couple intro sentences) |
(→Available AIs: add MP AIs list) |
||
Line 20: | Line 20: | ||
* '''[[RCA_AI|Default (RCA) AI]]''': If no special instructions are given, this AI is used automatically for all computer-controlled sides with no setup needed. It can be customized in many different ways. | * '''[[RCA_AI|Default (RCA) AI]]''': If no special instructions are given, this AI is used automatically for all computer-controlled sides with no setup needed. It can be customized in many different ways. | ||
− | |||
* The '''[[Experimental_AI]]''' adds additional features to the RCA AI. It is still under development (thus its name) and might change from release to release, but it outperforms the default AI on most standard maps. | * The '''[[Experimental_AI]]''' adds additional features to the RCA AI. It is still under development (thus its name) and might change from release to release, but it outperforms the default AI on most standard maps. | ||
− | |||
* '''[[Micro_AIs]]''' add specialized behavior to Wesnoth that cannot be achieved with the default AI. There is a large number of available Micro AIs and they can be set up using just a few lines of WML code. | * '''[[Micro_AIs]]''' add specialized behavior to Wesnoth that cannot be achieved with the default AI. There is a large number of available Micro AIs and they can be set up using just a few lines of WML code. | ||
− | |||
* '''[[Creating Custom AIs|Custom AIs]]''': In addition to these AIs, Wesnoth provides a large variety of options for writing you own AI code. | * '''[[Creating Custom AIs|Custom AIs]]''': In addition to these AIs, Wesnoth provides a large variety of options for writing you own AI code. | ||
=== AIs Available in the Multiplayer Setup Menu === | === AIs Available in the Multiplayer Setup Menu === | ||
+ | |||
+ | Several AIs are available to be chosen for computer players in the multiplayer setup menu: | ||
+ | |||
+ | * '''[[RCA_AI|Default AI (RCA)]]''': This is the same AI as listed above. | ||
+ | * '''<s>Strong AI (RCA)</s>''': This is essentially just the default AI with very slightly modified recruiting. It will be removed from the default menu soon. | ||
+ | * '''[[Experimental_AI]]''': Again, the same AI as described above. | ||
+ | * <s>Debug Mode '''Dev AIs'''</s>: If Wesnoth is in debug mode, quite a few additional AIs are available in the menu. These are, however, mostly not very good (worse than the default) or even entirely borken. We will remove most or all of these shortly. | ||
+ | * '''[[Creating Custom AIs|Custom AIs]]''': Just as for scenario code, it is also possible to provide custom AIs for selection from the MP setup menu. These can be written either for specific scenarios/maps or so that they are available for all maps. | ||
== Available AI Tools == | == Available AI Tools == |
Revision as of 04:48, 25 February 2016
This page is currently under construction (Feb 2016) |
Contents
Introduction to the Wesnoth AIs
Wesnoth provides a general artificial intelligence (AI) which is active by default for all computer-controlled sides, as well as several optional AIs. These AIs are highly configurable and can be included and/or customized by scenario and map creators using simple WML code. For AI developers, it is also possible to replace parts or all of the default AI with custom code.
This page provides a brief summary of the available AIs and of the methods, tools and resources available for using and modifying them. Links are provided to detailed documentation on each of the topics. For reference, we also provide a brief timeline describing some of the main development milestones of the Wesnoth AIs.
Available AIs
This section briefly lists the different AIs available in Wesnoth. Click on the links provided here and in the resources section below for detailed descriptions of the AIs and for instructions for using and customizing them.
AIs Available to Scenario and Map Designers
Wesnoth comes with several built-in AIs from which scenario and map designers can choose:
- Default (RCA) AI: If no special instructions are given, this AI is used automatically for all computer-controlled sides with no setup needed. It can be customized in many different ways.
- The Experimental_AI adds additional features to the RCA AI. It is still under development (thus its name) and might change from release to release, but it outperforms the default AI on most standard maps.
- Micro_AIs add specialized behavior to Wesnoth that cannot be achieved with the default AI. There is a large number of available Micro AIs and they can be set up using just a few lines of WML code.
- Custom AIs: In addition to these AIs, Wesnoth provides a large variety of options for writing you own AI code.
AIs Available in the Multiplayer Setup Menu
Several AIs are available to be chosen for computer players in the multiplayer setup menu:
- Default AI (RCA): This is the same AI as listed above.
Strong AI (RCA): This is essentially just the default AI with very slightly modified recruiting. It will be removed from the default menu soon.- Experimental_AI: Again, the same AI as described above.
Debug Mode Dev AIs: If Wesnoth is in debug mode, quite a few additional AIs are available in the menu. These are, however, mostly not very good (worse than the default) or even entirely borken. We will remove most or all of these shortly.- Custom AIs: Just as for scenario code, it is also possible to provide custom AIs for selection from the MP setup menu. These can be written either for specific scenarios/maps or so that they are available for all maps.
Available AI Tools
- Composite AI
- Lua AI
- Formula AI
List of Wesnoth AI Resources
AI Resources for Scenario and Map Creators
- RCA_AI: Description of Wesnoth's default AI, with the following additional documentation:
- AiWML: Customizing the default AI using WML
- AI_Recruitment: Customizing the recruitment of the default AI
- Modifying AI Components: Instructions for some of the more complex customization tasks
- Experimental_AI: Experimental augmented version of the default AI with additional features
- Micro_AIs: Additional specialized AI behavior that cannot be achieved with the default AI
Resources for AI Coders
- Wesnoth_AI_Framework: General principles of the inner workings of the Wesnoth AI mechanism
- Creating_Custom_AIs: Instructions for doing just that
- Lua AI: Recommended method for writing custom AIs
Legacy Resources for AI Coders
- Lua_AI_Legacy_Methods_Howto: Old methods for writing custom AIs using Lua AI
- Formula AI: Another language for writing custom AIs
Miscellaneous Other Resources
The following resources are not generally needed for understanding, using and modifying Wesnoth AIs, but they might nevertheless contain some useful bits of information for the interested reader.
Finally, the link to the AI Category at the bottom of this page includes links to all the remaining AI-related pages.
A Very Brief History of Wesnoth AIs
While the general principle of the Wesnoth AI concept has been relatively stable throughout its development, the AI implementation has seen dramatic changes. That said, basic scenario creator tasks such as modifying AI parameters in WML are usually not changed much in order to keep backward compatibility. On the other hand, the steps needed to write a custom candidate action and bind it into the existing AI framework might not be quite the same in Wesnoth 1.12 as they did in 1.10, and they are definitely different in 1.8.
It is not possible to capture all these changes on the Wesnoth AI wiki pages due to the complexity of the topic. They generally only refer to the latest stable release series and the current development release series. If, for some reason, you need to do AI work with an earlier version of Wesnoth, you might have to check out the history of the wiki pages. Another way to go about it is by checking out examples of how things are done in mainline or add-ons of the respective release series. In general, however, we strongly recommend using the latest Wesnoth versions, as modifying AI behavior has become a lot simpler than it used to be.
For reference, here is a list of some of the major milestones of the AI development:
- Up to Wesnoth 1.6
- The default AI of Wesnoth is, in fact, called Default AI, with
id=default_ai
in the configuration.
- The default AI of Wesnoth is, in fact, called Default AI, with
- Wesnoth 1.1/1.2:
- A Python API for AI development is introduced. This was later removed for security reasons.
- Wesnoth 1.5/1.6:
- Formula AI is introduced.
- Wesnoth 1.7/1.8
- Composite AI framework is introduced, with the default AI functionality ported to this framework in form of the RCA_AI.
- The RCA_AI becomes the default.
- LuaAI is introduced.
- Wesnoth 1.11/1.12
- Introduction of the Micro_AIs
- External Lua candidate actions become fully usable. They are now the recommended method for writing creating custom AIs