RCA AI

This page is currently under construction (Feb 2016)

RCA AI Summary

The RCA (Register Candidate Action) AI is the default AI since Wesnoth 1.9. Its name stems from the fact that it has a list of potential actions, called candidate actions (CAs), that are evaluated for each move and are executed in order of evaluation score. The RCA AI is highly configurable in WML. It can also be modified by removing default CAs or adding custom CAs.

This page describes the RCA principles and components as well as how to configure and modify the AI behavior. For related information also see:

• AiWML
• etc.

RCA AI components

The RCA AI consists of the following components:

• Candidate actions are the potential actions the AI might take during an AI turn, such as attacking, village grabbing, recruiting or retreating injured units.

• Aspects are the parameters which can be used to configure the AI behavior.

• Goals are a specific type of aspect which define targets toward which the AI moves. It is very important to understand that these are only move-to targets, not attack targets.

Each of these components is described in the following, with links provided to other pages dealing with methods to configure or modify them.

Candidate Actions (CAs) -- Evaluating AI Moves

For each move of its turn, the AI evaluates a number of potential actions, called candidate actions (CAs). The CA with the highest evaluation score is executed and the process is repeated, until no more valid moves are found. This ends the AI turn.

The scores of the RCA AI have fixed values. These values can be modified, but only to another fixed value. For example, the recruitment CA by default has a score of 180,000. The default score for attacks is 100,000. Thus, if recruiting is possible, it will always be done before attacks. However, that does not mean that all recruiting will always happen before all attacks.

Consider the case that all castle hexes are occupied by AI units which were recruited on a previous turn and have not been used yet. No recruiting is possible, so the AI moves on to other CAs. Once it gets to attacks, one of the units (or a group of units) might be selected to move off the castle and attack a close-by enemy. Now a castle hex is available for recruiting, which has then the highest evaluation score. This cycle might be repeated several times.

In its default configuration, the RCA AI evaluates the following CAs, sorted in order of their evaluation score:

• Goto CA (score 200,000): Move units toward the coordinates set by goto_x, goto_y in their unit WML.

• Recruitment CA (score 180,000): Recruit or recall units.

• Move leader to goals CA (score 140,000): Move the leader toward goals set by [leader_goal].

• Move leader to keep CA (score 120,000): Move the leader toward the closest available keep.

• Combat CA (score 100,000): Attack enemy units that are in range. Note that this CA includes the move to a hex adjacent to the enemy unit as well as the attack itself.

• Healing CA (score 80,000): Move units onto healing locations (generally villages).

• Villages CA (score 60,000): Move units onto villages that are unowned or owned by an enemy.

• Retreat CA (score 40,000): Evaluate if any units are in grave danger or hopelessly outnumbered, and if so, retreat them.

• Move to targets CA (score 20,000): Evaluate potential targets and move units toward them. The evaluation takes into account how valuable the targets are (this is configurable by setting goals), how easily the AI's units can get there, how exposed to attacks they will be, etc. Targets are enemy leaders, enemy units that pose a threat to the AI leader and villages, as well as anything defined by the [goal] tag. It is important to understand that targets only apply to the move-to-targets CA. If a target is within range of the AI's unit(s) on the current turn, other CAs, such as combat, healing and villages have a higher evaluation score and are (usually) executed first. Thus, a target is specifically not an attack target, but a move target.

• Leader shares keep CA (score 10,000): Move the leader off the keep to let an allied leader recruit, if an allied leader can get to the keep in one move. Note: This CA used to be called 'passive_leader_shares_keep'. That name still works for the time being but will be deprecated at some point.

As already mentioned, the CAs are always evaluated (and executed, if a possible move is found) in the order given above. For example, the Goto CA is always the first move that is done (if goto_x and goto_y are defined and a move toward them is possible). Equivalently, if a valid attack is found in the combat CA, it is always executed before any healing, village grabbing or move-to-target moves. One of the effects this has is that attacks always have priority over any goals/targets of the move-to-target phase. It is very important to understand this, as it is a frequent source of confusion for scenario creators.

Note that nothing in Wesnoth' general AI mechanism limits CAs to have fixed evaluations scores. For examples, some of the Micro_AIs as well as some custom AI CAs return variable scores.

Aspects

An aspect is simply a parameters that the AI provides to scenario creators for configuring the AI behavior. For example, one can change how aggressive/careful the AI acts, how recruiting is prioritized or whether the leader participates in attacks.

The RCA AI has a large number of aspects. Their description is therefore given its own page.

Goals

Goals, which define AI targets, are a special type of aspects that influence the behavior of the AI in the move-to-targets candidate action.

AI targets are used in the move-to-targets candidate action to move the AI's units toward selected units or locations. The AI engine automatically selects all enemy leaders, enemy units that pose a threat to the AI leader and unowned or enemy-owned villages as targets and assigns them certain base values. A score is then assigned to each target based on this base value, as well as on the movement cost required to get to the target, whether moving there would put the units involved in danger, etc.

It is possible to define additional targets or influence the relative ratings of the default targets. This is done with the [goal] tag, in which we can set criteria selecting targets and define their base values (which are then evaluated in the same way as the values of the default targets). Values set with the [goal] tag should always be relative to each other. The AI is willing to dedicate twice as many resources and travel twice as far to get to a target worth '2.0' as for a target worth '1.0'.

We stress again that these targets apply to the move-to-targets CA only and have no influence on other CAs. This is significant since CAs that deal with, for example, combat or village-grabbing have a higher score than the move-to-targets CA and are therefore always executed first. In practice that means that targets set with the [goal] tag only affect the AI behavior for targets that it cannot reach during the current turn, and only after combat, village-grabbing etc. are finished.

Five types of targets can be set using the [goal] tag: target (the default), target_location, protect_unit, protect_my_unit, and protect_location. As there a several different goals available, they are given their own subsection on the AI aspects page.

Configurability

The RCA AI is highly configurable in three different ways (sorted by increasing complexity):

• Changing the parameters/weights by which the AI moves (candidate actions) are evaluated. This can be done easily in the WML code by setting aspects and goals and is the content of this page.

• Changing the order in which candidate actions are executed (changing their evaluation scores) or deleting candidate actions. See Practical Guide to Modifying AI Behavior for details.

• Writing your own candidate actions using FormulaAI or LuaAI. See Practical Guide to Modifying AI Behavior for details.

Todo: pull together the content that is scattered all over the place on other wiki pages; or possibly give this its own page