Difference between revisions of "NotSoEasyCoding"

From The Battle for Wesnoth Wiki
(Passphrase encryption)
(Gold graph: replace GNA link with Wayback Machine backup)
 
(34 intermediate revisions by 14 users not shown)
Line 1: Line 1:
This page lists projects which are considered a good idea by the developers but which have nobody working on them so far. If you think you've got the required skill for a task go on, implement it and you've got a high chance that it'll be accepted. The remaining barrier will only be that it's done well. :-)
+
This page lists projects which are considered a good idea by the developers, but which have nobody working on them so far. The tasks here are significantly more difficult than the ones in the similar [[EasyCoding]] page. If you think you've got the required skill for one of the tasks listed here, go on, implement it, and you've got a high chance that it'll be accepted. The remaining barrier will only be that it's done well. :-)
  
 
If you are such a person, you should feel free to edit this page.
 
If you are such a person, you should feel free to edit this page.
  
If you're not, you should post a feature request and discuss your idea on the forum or IRC. A coder with better knowledge of the code might give you the green light to add your feature here.
+
If you're not, you should post a feature request and discuss your idea on the forum or IRC or Discord. A coder with better knowledge of the code might give you the green light to add your feature here.
  
 
Anybody should feel free to add "clues" to any tasks, that is entry points, traps to avoid, person to contact to discuss and so on.
 
Anybody should feel free to add "clues" to any tasks, that is entry points, traps to avoid, person to contact to discuss and so on.
  
If you plan to work on a feature, write your name at the bottom of the feature, with the date. Note that if you spend too long at working on a feature we'll "free" it back (that is if you're not working on it. If you have problems implementing it, just tell us....)
+
If you plan to work on a feature, write your name at the bottom of the feature, with the date. Note that if you spend too long at working on a feature we'll "free" it back (that is if you're not working on it. If you have problems implementing it, just tell us...). We sometimes forget to update this page so it is recommended that, before you start to work on a task, that you ask in irc/Discord whether its still considered a good idea.
 +
 
 +
If you are part of the Wesnoth dev team you can also add new entries to the list, a new entry must contain at least
 +
 
 +
1) A description of the problem.
 +
2) A motivation why or in which situations this is important.
 +
3) A link to a corresponding ticket on our bugtracker for discussion, if there is no ticket yet, then make one.
  
 
__TOC__
 
__TOC__
Line 13: Line 19:
 
== Game engine ==
 
== Game engine ==
  
=== SDL 2 + OpenGL port ===
+
=== [[OpenGL port]] ===
  
Wesnoth currently depends on the unmaintained SDL 1.2.x code base and the 1.2.x-based versions of its companion libraries (SDL_image, SDL_mixer, SDL_net, SDL_ttf). This means Wesnoth can't benefit from features added in newer versions of SDL such as built-in support for Android and iOS, improved cross-platform Unicode support, built-in clipboard support, and any bug fixes made since SDL 1.2.15.
+
While software rendering is all good and nice, Wesnoth's approach does not scale well as display resolutions increase and the need for supporting high DPI configurations is factored in. One can easily see that our zoom functionality is clunky and inefficient. Having support for OpenGL and shaders would also enable us to implement fancier graphical gimmicks such as particle effects and atmospheric lighting. The downside of adding OpenGL to the mix is that we'd need people with a specific skillset to help us maintain the graphics engine in the long term, as hardware and driver-specific quirks are inevitable. Some users are also concerned about changing Wesnoth's hardware requirements so that they would be unable to play using old or unsupported hardware/OS configurations.
 
 
The problem with porting Wesnoth to SDL 2.0 as explained by lipkab (who attempted the task as part of GSoC 2014) is that SDL 2.0's software rendering API lacks some things Wesnoth needs such as a specific alpha blending mode (TODO: link to conversations here).
 
 
 
Furthermore, while software rendering is all good and nice, Wesnoth's approach does not scale well as display resolutions increase and the need for supporting high DPI configurations is factored in. One can easily see that our zoom functionality is clunky and inefficient. Having support for OpenGL and shaders would also enable us to implement fancier graphical gimmicks such as particle effects and atmospheric lighting. The downside of adding OpenGL to the mix is that we'd need people with a specific skillset to help us maintain the graphics engine in the long term, as hardware and driver-specific quirks are inevitable. Some users are also concerned about changing Wesnoth's hardware requirements so that they would be unable to play using old or unsupported hardware/OS configurations.
 
  
 
For hardware rendering to be effective, in particular, Wesnoth would necessitate a complete rewrite of the graphics rendering code (the display and game_display classes), the image cache manager (used to abstract the process of loading images from disk and applying image path functions), and potentially GUI2's canvas code. All three would have to limit the amount of textures they allocate to the absolute minimum, using larger textures instead. For example, the image cache could be reimplemented to load images from an internal spritesheet generated during the game loading process. (WML/Lua support for spritesheets would be nice would defining an API for it would only distract from the actual task at hand.)
 
For hardware rendering to be effective, in particular, Wesnoth would necessitate a complete rewrite of the graphics rendering code (the display and game_display classes), the image cache manager (used to abstract the process of loading images from disk and applying image path functions), and potentially GUI2's canvas code. All three would have to limit the amount of textures they allocate to the absolute minimum, using larger textures instead. For example, the image cache could be reimplemented to load images from an internal spritesheet generated during the game loading process. (WML/Lua support for spritesheets would be nice would defining an API for it would only distract from the actual task at hand.)
  
The greatest difficulty in handling this task probably lies in writing a new optimized rendering engine and updating all code that relies on the old display/game_display API and semantics accordingly. The GUI2 framework code is presently unmaintained and it would take some time for somebody to study and change the current implementation. Finally, as we don't have a graphics engine maintainer at this time, this task involves an implicit long-term commitment to the project that extends beyond Wesnoth 1.14.x (or whichever series will see this project completed).
+
The greatest difficulty in handling this task probably lies in writing a new optimized rendering engine and updating all code that relies on the old display/game_display API and semantics accordingly. The GUI2 framework code is presently unmaintained and it would take some time for somebody to study and change the current implementation. Finally, as we don't have a graphics engine maintainer at this time, this task involves an implicit long-term commitment to the project that extends beyond whichever Wesnoth series that will see this project completed.
 
 
=== Make a "replay actions since my last turn" button ===
 
 
 
It would be very convenient if there an ability to replay everything your opponents just did at the start of your turn, since sometimes things go out of vision or are confusing.  
 
  
The feature would be like a "replay since my last turn" menu option or button -- most likely, the best approach to implement it is to store a copy of the game_state object in playcontroller.cpp or even in resources, and to refactor the backlog object so that we can hold a "bookmark", i.e. a pointer, to the last position in the replay that we might look to jump back to. The replay process would work by swapping out for the old gamestate, then replaying through the actions since the bookmark until we get back up to speed. The difficult part would be making sure that scenarios with scripted WML events don't break when we do this. For debugging purposes, it might be good to check that at this point we have the same gamestate we did before we clicked the button. The bookmark should only be advanced when we end our turn, and there might be perhaps need to be multiple bookmarks, one for each side, to handle what happens when a side disconnects or is reassigned.
+
One of the many issues related to switching from software rendering to hardware rendering is Wesnoth's [[ImagePathFunctions]] mini-language. There is already a proof of concept [https://github.com/CelticMinstrel/wesnoth-ipf here] that converts most IPFs to OpenGL shader code, but quite a bit more work would need to be done to make something usable out of it. In particular, the ability to compile arbitrary [[Wesnoth Formula Language]] code into shaders would be needed, since some IPFs embed the language.
 
 
It would be especially helpful for MP play to have this, where special tactics with ambush units are quite common. Part of the design criteria of wesnoth is that it should be a high-level, thoughtful turn based strategy game, but you should be able to play asynchronously and not necessarily give attention to the game until your turn bell rings if you don't want to. Having ambush units and no ability to replay their movements during the opponents turn harms that goal.
 
 
 
For MP play, it will require special attention to make sure that events like "synchronize_choice" are handled correctly so as not to cause out of sync errors, and also that the timer is handled correctly.
 
 
 
Feature request: https://gna.org/bugs/?15334
 
  
 
=== Improve WML error reporting ===
 
=== Improve WML error reporting ===
Line 41: Line 33:
 
There are many programming bugs that give very unclear or cryptic error messages when using WML. Here are some examples:
 
There are many programming bugs that give very unclear or cryptic error messages when using WML. Here are some examples:
  
* When calling a macro with the wrong number of arguments, Wesnoth tells the number it expected, and the number it got, and at which line number it was instantiated. However, it would be helpful if it would also tell the line number of the definition of the macro. This might be helpful if someone is redefining macros.
+
* <strike>When calling a macro with the wrong number of arguments, Wesnoth tells the number it expected, and the number it got, and at which line number it was instantiated. However, it would be helpful if it would also tell the line number of the definition of the macro. This might be helpful if someone is redefining macros.</strike>
  
 
* For places where a standard unit filter is expected, if one is not found, the game should point out a problem. For places where such a filter is expected but [filter] child should not appear, if one does it should report an error and a line number. Many users have a hard time with this kind of thing.
 
* For places where a standard unit filter is expected, if one is not found, the game should point out a problem. For places where such a filter is expected but [filter] child should not appear, if one does it should report an error and a line number. Many users have a hard time with this kind of thing.
  
* When doing scenario transitions in a campaign, if the side definitions don't matchup exactly the game tends to give unintelligible error messages. For instance, if one is transitioning and there is an AI side which does not have a leader (but it has a starting location in the map) it must have "no_leader = yes" in its [side] tag, or else when the team_builder objects enter stage two, the game will try to create a unit with an empty type, and the constructor of class unit will fail giving the error message "game::game_error tried to create unit with empty type". This really needs to be much better. For instance, giving a line number of a problem, or suggesting that no_leader should be used. (Note that, it is often possible to debug problems like this by turning on --log-debug=team_construction at commandline but I doubt that there are any users that know about this, you would only learn from reading the C++... without such debug info, fixing things like this can literally take hours.) For that matter it's some question why the team_builder doesn't just stop trying to build a unit when it sees it doesn't have enough info...
+
* When doing scenario transitions in a campaign, if the side definitions don't match up exactly the game tends to give unintelligible error messages. For instance, if one is transitioning and there is an AI side which does not have a leader (but it has a starting location in the map) it must have "no_leader = yes" in its [side] tag, or else when the team_builder objects enter stage two, the game will try to create a unit with an empty type, and the constructor of class unit will fail giving the error message "game::game_error tried to create unit with empty type". This really needs to be much better. For instance, giving a line number of a problem, or suggesting that no_leader should be used. (Note that, it is often possible to debug problems like this by turning on --log-debug=team_construction at commandline but I doubt that there are any users that know about this, you would only learn from reading the C++... without such debug info, fixing things like this can literally take hours.) For that matter it's some question why the team_builder doesn't just stop trying to build a unit when it sees it doesn't have enough info...
  
 
* Recursive macros break the game, and not by stack overflow but by exhausting the heap (which usually takes forever on modern OSes and results in memory thrashing <i>before</i> resource starvation). It would be nice if we could catch this and report an error.
 
* Recursive macros break the game, and not by stack overflow but by exhausting the heap (which usually takes forever on modern OSes and results in memory thrashing <i>before</i> resource starvation). It would be nice if we could catch this and report an error.
Line 51: Line 43:
 
Many WML users are students or beginners to programming, so any improvements to WML error reporting are a big help for their learning process -- many veterans would appreciate the extra help as well. In part we need fixits here and there, but more broadly we need a smarter system that can figure out what's really wrong when things go wrong, and give helpful suggestions.
 
Many WML users are students or beginners to programming, so any improvements to WML error reporting are a big help for their learning process -- many veterans would appreciate the extra help as well. In part we need fixits here and there, but more broadly we need a smarter system that can figure out what's really wrong when things go wrong, and give helpful suggestions.
  
=== Map label "groups" which can be selectively turned on and off by the user ===
 
 
It would be nice if the user could have more control over how map labels are displayed, for instance to be able to check on / off labels made by certain players, and for custom scenarios, to be able to make custom classes which the use can turn on or off. This might be helpful for custom scenarios esp. which might have some technical info they want to show, but which it might be messy to display all of the time. The hard part of this is that there should ideally be a gui to work with the map labels, although maybe this need could be worked around or simplified somehow.
 
 
=== Add a new damage stats calculation mode to support scenarios with extremely high stats ===
 
  
Most players use the damage calculation window constantly when they play so that they can see what to expect from various attacks. The way the game is currently set up, when a unit is selected, as soon as another unit is moused over the stats for an attack will be calculated, whether or not the user actually brings up the window.
+
=== Don't store all events in savefiles ===
  
The probabilities for the various outcomes are calculated by explicitly calculating the distribution of attacker and defender hp / slowed status after each swing by either party, one swing at a time. Thus at the end we get exact probabilities of the possible outcomes.
+
Currently all events in a scenario are stored twice in each savefile (in [snapshot] and it [replay_start]), specially on wml-heavy umc content this can make savefiles quite big, The proposed solution is that events are not stored in savefiles when they are the same as in the scenario/era/modification file (e.g. not dynamically added with actionwml).
 +
In detail the savefile should for all events that have an id and are not generated dynamically ([event] actionwml), store dummy events like
 +
[event]
 +
  id=event_id
 +
  is_unchanged=yes
 +
[/event]
 +
in the savefiles (instead of full events), where the event is then read from the scenario/era/modification tag when the scenario is loaded. This should only apply to campaigns/modifications/mp maps/eras that require download (which is usually the case for campaigns but not for mp maps)
  
However, this comes at a cost -- the running time of the calculation can in the worst case be something like O( attacker_hp * defender_hp * total_number_of_strikes). In default era wesnoth (and in much of UMC) this is fine because units don't get extremely high hp values. However in some UMC units do get extremely high hp, and many will also have specials like drain and berzerk, and may have many different weapons as well. At some point these scenarios become unplayable even on a machine of moderate specs because mousing over any unit causes > 10 seconds of lag during which the game becomes unresponsive, trying to calculate attack outcomes.
 
 
In these cases, it would be better to give an "inexact" damage prediction, based on just simulating a few thousand attacks and plotting the results. Since it's a monte carlo algorithm rather than an exact algorithm, there will be some error, but if it makes the game playable then it's clearly an improvement, and anyways for "extreme stats" battles with high strikes and damage, the outcome is in a sense less random anyways because the outcomes with inordinate amounts of hits and misses are more and more rare (law of large numbers), so the error shouldn't actually be terribly significant.
 
 
If there were an advanced preference that caused the predictions to use such an algorithm instead of the current one, so that the user could turn it on if they start to get problems, it would eliminate a significant headache for some UMC.
 
  
 +
See also https://github.com/wesnoth/wesnoth/issues/1512
  
 
== Multiplayer/replay features ==
 
== Multiplayer/replay features ==
Line 76: Line 65:
 
A possible nice feature for this purpose would be to allow the user to click on the graph at key points which would trigger the "back to turn" mechanism to jump back in the replay, or automatically play the replay forwards from the beginning to that point... etc.
 
A possible nice feature for this purpose would be to allow the user to click on the graph at key points which would trigger the "back to turn" mechanism to jump back in the replay, or automatically play the replay forwards from the beginning to that point... etc.
  
Related email on dev-talk: https://mail.gna.org/public/wesnoth-dev/2014-02/msg00089.html
+
Related email on dev-talk: http://web.archive.org/web/20170505024430/https://mail.gna.org/public/wesnoth-dev/2014-02/msg00089.html
  
 
=== Automatically link up to wesnothd server on a local network ===
 
=== Automatically link up to wesnothd server on a local network ===
Line 84: Line 73:
 
The extra code should be guarded with preprocessor flags so that ZeroConf does not become a mandatory build dependency of Wesnoth.
 
The extra code should be guarded with preprocessor flags so that ZeroConf does not become a mandatory build dependency of Wesnoth.
  
https://gna.org/bugs/?13703
+
https://github.com/wesnoth/wesnoth/issues/1162
  
 
=== Stock MP chat messages for language-independent communication ===
 
=== Stock MP chat messages for language-independent communication ===
Line 96: Line 85:
  
 
As of 1.13.1+dev, GUI2's core and framework (including widgets and their APIs) are completely unmaintained. A prospective maintainer would have to be able to understand pretty advanced C++ making abundant use of template-based abstractions (most notably, the event handling code is almost completely implemented this way), multiple inheritance, and polymorphism. There is also some missing functionality (such as combo boxes and modeless dialogs) that the author did not get to implement, as well as work-in-progress functionality (new listbox and tooltip implementations, not enabled by default).
 
As of 1.13.1+dev, GUI2's core and framework (including widgets and their APIs) are completely unmaintained. A prospective maintainer would have to be able to understand pretty advanced C++ making abundant use of template-based abstractions (most notably, the event handling code is almost completely implemented this way), multiple inheritance, and polymorphism. There is also some missing functionality (such as combo boxes and modeless dialogs) that the author did not get to implement, as well as work-in-progress functionality (new listbox and tooltip implementations, not enabled by default).
 
=== Multi-line textbox, single-line textbox improvements ===
 
 
GUI2 has a single-line textbox widget which works well for most purposes but falls short in a few niche cases. In particular, it's not possible to make it read-only without entirely disabling the user's ability to interact with the contents, which is inconvenient in places like the Game Paths dialog (or the About dialog in version 1.13.2 and later).
 
 
The widget also does not support multi-line contents. For this reason, GUI2 dialogs that present multi-line (read-only) text to the user make use of the scroll_label+clipboard button convention introduced by shadowm in 1.12.x (see the Chat Log, Gamestate Inspector, and WML load error dialogs for examples). This has the obvious limitations of not allowing the user to select specific portions of the contents, and not supporting editing.
 
 
=== Generic tab_container widget ===
 
 
After 1.13.1 was released, shadowm discovered a trick to implement tabbed dialogs in GUI2, involving a general widget bug fix to make children consider their parents' visibility when processing events, and an addition to the stacked_widget API enabling users to hide all but a single active layer.
 
 
The About dialog introduced in version 1.13.2 will use a horizontal listbox in combination with a stacked_widget, but ideally we should be able to reuse this pattern in more places without having to clutter up dialog implementations with the requisite code to synchronize the listbox and the stacked_widget's states. This hypothetical tab_container widget would combine the listbox and the stacked_widget to implement tabs in a cleaner fashion without having to expose the implementation details to individual dialog instances.
 
 
By all means, this should be an EasyCoding task, but GUI2's unusual code layout and API design conventions (compared to the rest of Wesnoth) ''may'' make it harder than it's supposed to be.
 
 
If you want to work on this, you should poke shadowm to make sure you don't duplicate efforts as he is working on a GUI2 port of the Preferences dialog and may take up this task after a while if no-one has done so first.
 
 
=== GUI2 combo box and menu ===
 
 
GUI2 most notably lacks a combo box widget (e.g., used in the GUI1 MP side setup screen) and menu display (either for the game's menu bar or context menus). It is not known at this time how much work would have to be done in GUI2's core and framework to allow implementing these widgets -- in particular considering how GUI2 widgets are never used without a parent dialog, which menus might not necessarily have, at least with the current gameplay UI implementation.
 
 
GUI2 menu FR: https://gna.org/bugs/?22820
 
 
GUI2 combo box FR: https://gna.org/bugs/?23652
 
  
 
=== GUI2 themable in-game UI ===
 
=== GUI2 themable in-game UI ===
Line 127: Line 92:
 
Moving the theme UI to GUI2 would probably require finishing up theme support in GUI2 (which is largely incomplete), and may benefit from a rendering engine redesign as is also required for porting the game to SDL 2; in particular so that the GUI aspects are more clearly separated from the game board rendering aspect.
 
Moving the theme UI to GUI2 would probably require finishing up theme support in GUI2 (which is largely incomplete), and may benefit from a rendering engine redesign as is also required for porting the game to SDL 2; in particular so that the GUI aspects are more clearly separated from the game board rendering aspect.
  
'''Note:''' This task is here solely for the sake of completeness, and only somebody very well versed in the intricacies of Wesnoth's game rendering code and GUI2 should '''ever''' try to take it up. (And even then, I would not want to be anywhere near that person when they inevitably break down and fling one or more tables around upon realizing the sheer complexity of the task. -- shadowm)
+
'''Note:''' This task is here solely for the sake of completeness, and only somebody very well versed in the intricacies of Wesnoth's game rendering code and GUI2 should '''ever''' try to take it up. (And even then, I would not want to be anywhere near that person when they inevitably break down and fling one or more tables around upon realizing the sheer complexity of the task. -- Iris)
  
 
== Add-ons server and client ==
 
== Add-ons server and client ==
Line 133: Line 98:
 
=== Passphrase hashing ===
 
=== Passphrase hashing ===
  
The add-ons server (campaignd) uses a very dumb authentication scheme for uploading add-ons where an author sets a passphrase (or gets a random passphrase assigned by the game) the first time they upload to the server, and subsequent uploads of the same add-on are only allowed if the passphrase matches. The passphrase is stored in clear text form both client and server-side, which has [http://forums.wesnoth.org/viewtopic.php?f=62&t=42663 various implications].
+
The add-ons server ([[campaignd]]) uses a very dumb authentication scheme for uploading add-ons where an author sets a passphrase (or gets a random passphrase assigned by the game) the first time they upload to the server, and subsequent uploads of the same add-on are only allowed if the passphrase matches. The passphrase is stored in clear text form both client and server-side, which has [http://forums.wesnoth.org/viewtopic.php?f=62&t=42663 various implications].
  
Ideally, the server should store all passphrases in hashed form, and preferably the client too should send an hashed passphrase to the server.
+
Ideally, the server would store all passphrases in a hashed form.
  
 
=== Port redirection ===
 
=== Port redirection ===
Line 142: Line 107:
  
 
The add-ons server (campaignd) and client instead have a hardcoded default port number for a Wesnoth version series. For example, 1.12.x is hardcoded to default to 15006. This becomes a maintainability issue as add-on servers get decommissioned and their port numbers can't be reused for fear of misdirecting obsolete client versions to the wrong instance with incompatible add-ons.
 
The add-ons server (campaignd) and client instead have a hardcoded default port number for a Wesnoth version series. For example, 1.12.x is hardcoded to default to 15006. This becomes a maintainability issue as add-on servers get decommissioned and their port numbers can't be reused for fear of misdirecting obsolete client versions to the wrong instance with incompatible add-ons.
 
=== Incremental upgrades and uploads ===
 
 
Right now, whenever a new add-on version is published, players must download (or conversely, upload) the whole contents, even if the differences between both versions amount to a single line change. This is not a problem with small add-ons, but there is a substantial number of large (> 10 MiB) add-ons on the server. Large downloads and uploads are inconvenient for players on slow or metered connections, and also increase the server's traffic requirements.
 
 
Ideally, for each add-on it attempts to upgrade or upload, the add-ons client should be able to send the server its local list of files with hashes, so that the server can identify which files need to be transmitted to/by the client, all archived on the fly like normal add-on downloads/uploads. The obvious downside is that the server would need to calculate an add-on's file hashes on demand, increasing CPU usage when servicing upgrades or uploads; this could be avoided by generating its file hashes when servicing uploads instead.
 
 
See also: https://gna.org/bugs/?19972 (for uploads only; there should be one for downloads too but I couldn't find it -- shadowm)
 
 
=== Porting the server to Asio ===
 
 
Although the client uses Boost.Asio for communications, the server continues to use SDL_net instead. This means, amongst other things, that we are limited to IPv4 and an unmaintained codebase full of hacks waiting to break apart in the future (Wesnoth's SDL_net code does, amongst other things, tamper with what are supposed to be opaque data structures maintained by SDL_net).
 
 
There was an attempt to build a new add-ons server (umcd) using Asio as part of GSoC, but it ultimately failed and the developers are no longer involved with the project. The umcd codebase status as of this writing is unknown.
 
  
 
== Multiplayer server and client ==
 
== Multiplayer server and client ==
 
=== Porting the server and client to Asio ===
 
 
As with campaignd above, it would be nice to move the multiplayer server and client to Asio so that we could drop the SDL_net dependency and obtain IPv6 support.
 
  
 
=== Improve server WML processing ===
 
=== Improve server WML processing ===
  
The server uses its own custom WML implementation separate from the main engine's to store and process WML objects for games -- see [[WesnothdDesign#simple_wml]]. This is intended to improve performance and reduce wesnothd's memory footprint with large numbers of games and complex scenarios. However, the simple_wml code sometimes messes up WML attribute translatability, resulting in MP scenarios/campaigns being untranslated for non-hosts in networked MP (http://gna.org/bugs/?22989). Fixing this is not easy due to the aforementioned performance requirements.
+
The server uses its own custom WML implementation separate from the main engine's to store and process WML objects for games -- see [[WesnothdDesign#simple_wml]]. This is intended to improve performance and reduce wesnothd's memory footprint with large numbers of games and complex scenarios. However, the simple_wml code sometimes messes up WML attribute translatability, resulting in MP scenarios/campaigns being untranslated for non-hosts in networked MP (https://github.com/wesnoth/wesnoth/issues/1420). Fixing this is not easy due to the aforementioned performance requirements.
 
 
== Data structures ==
 
 
 
=== Make the Lua state persistent ===
 
 
 
Wesnoth is designed to make all data files as simple and human-readable as possible, including savefiles. WML is designed so that it is always very easy to write the entire WML state as plaintext and reload it correctly. There are many benefits of this, but especially
 
 
 
* It makes it easy for beginners / students to read the files and see what's going on
 
* It makes it easy for us to debug problems without needing special tools to read the savefiles
 
* It makes it easy to edit save files to work around any possible bugs. Users have even reported opening savefiles from version 1.10 in microsoft word (!) to correct minor bugs in mp and resaving them, as a policy for tournament games.
 
 
 
This was unfortunately somewhat lost when we added lua. If you use lua in your scenarios, things become more complicated because we can't save the lua state at all. If you rely on lua variables to save information, then when your scenario is saved and reloaded those variables will get wiped. The wesnoth engine provides places for lua to hook into "onsave" and "onload" so that the scenario developer can write their own serialization routines, but this is just punting the problem to scenario developers.
 
 
 
We also provide the "preload" event type specifically to work around the issue -- unlike all other events, preload is called exactly once for every time the scenario is loaded. The purpose is to give another way that lua users can initialize a table of lua functions used by their addon and guarantee that this happens before the functions are called. But to non-lua users this event is basically unsafe for normal use otherwise -- if there is a preload event which e.g. increments a WML variable, then the WML state now depends on how many times the scenario is saved or reloaded. In a normal scenario, save / reload events should be invisible, and normally if this isn't the case it indicates a bug similar to an OOS.
 
  
A nice solution to this would be if we properly serialized the lua state alongside the WML in a savefile. The most suitable solution is probably this library: https://github.com/fnuecke/eris
+
== WML-related features ==
It would require significant additional work as well to find a good way to serialize the C functions that we expose to lua, and the userdata like units held by lua.
+
=== Game Information ===
  
More info here: http://lua-users.org/wiki/PlutoLibrary
+
* [query_location] - queries a location from the user
 +
** variable
 +
** [filter_location]
 +
''Regarding [query_location]: probably a better name would be choose_location. This is used when a wml event is running and needs to get a target location hex from the user. For example, you right click on a catapult unit and choose the menu item "fire Catapult." Now a [message] says to click on any target within 5 hexes. Now [choose_location] is encountered and the mouse cursor changes to a target sign (possibly customizable). If the user's mouse drifts outside of the allowed locations it changes to a cancel icon. If the operation is cancelled then the variable is cleared and no location stored. --Sapient''
  
 +
''This can be implemented in lua by using wesnoth.game_events.on_mouse_action and wesnoth.syncronize_choice''
  
[[Category:Development]]
+
https://github.com/wesnoth/wesnoth/issues/2325
[[Category:Future]]
 

Latest revision as of 20:08, 6 June 2024

This page lists projects which are considered a good idea by the developers, but which have nobody working on them so far. The tasks here are significantly more difficult than the ones in the similar EasyCoding page. If you think you've got the required skill for one of the tasks listed here, go on, implement it, and you've got a high chance that it'll be accepted. The remaining barrier will only be that it's done well. :-)

If you are such a person, you should feel free to edit this page.

If you're not, you should post a feature request and discuss your idea on the forum or IRC or Discord. A coder with better knowledge of the code might give you the green light to add your feature here.

Anybody should feel free to add "clues" to any tasks, that is entry points, traps to avoid, person to contact to discuss and so on.

If you plan to work on a feature, write your name at the bottom of the feature, with the date. Note that if you spend too long at working on a feature we'll "free" it back (that is if you're not working on it. If you have problems implementing it, just tell us...). We sometimes forget to update this page so it is recommended that, before you start to work on a task, that you ask in irc/Discord whether its still considered a good idea.

If you are part of the Wesnoth dev team you can also add new entries to the list, a new entry must contain at least

1) A description of the problem. 2) A motivation why or in which situations this is important. 3) A link to a corresponding ticket on our bugtracker for discussion, if there is no ticket yet, then make one.

Game engine

OpenGL port

While software rendering is all good and nice, Wesnoth's approach does not scale well as display resolutions increase and the need for supporting high DPI configurations is factored in. One can easily see that our zoom functionality is clunky and inefficient. Having support for OpenGL and shaders would also enable us to implement fancier graphical gimmicks such as particle effects and atmospheric lighting. The downside of adding OpenGL to the mix is that we'd need people with a specific skillset to help us maintain the graphics engine in the long term, as hardware and driver-specific quirks are inevitable. Some users are also concerned about changing Wesnoth's hardware requirements so that they would be unable to play using old or unsupported hardware/OS configurations.

For hardware rendering to be effective, in particular, Wesnoth would necessitate a complete rewrite of the graphics rendering code (the display and game_display classes), the image cache manager (used to abstract the process of loading images from disk and applying image path functions), and potentially GUI2's canvas code. All three would have to limit the amount of textures they allocate to the absolute minimum, using larger textures instead. For example, the image cache could be reimplemented to load images from an internal spritesheet generated during the game loading process. (WML/Lua support for spritesheets would be nice would defining an API for it would only distract from the actual task at hand.)

The greatest difficulty in handling this task probably lies in writing a new optimized rendering engine and updating all code that relies on the old display/game_display API and semantics accordingly. The GUI2 framework code is presently unmaintained and it would take some time for somebody to study and change the current implementation. Finally, as we don't have a graphics engine maintainer at this time, this task involves an implicit long-term commitment to the project that extends beyond whichever Wesnoth series that will see this project completed.

One of the many issues related to switching from software rendering to hardware rendering is Wesnoth's ImagePathFunctions mini-language. There is already a proof of concept here that converts most IPFs to OpenGL shader code, but quite a bit more work would need to be done to make something usable out of it. In particular, the ability to compile arbitrary Wesnoth Formula Language code into shaders would be needed, since some IPFs embed the language.

Improve WML error reporting

There are many programming bugs that give very unclear or cryptic error messages when using WML. Here are some examples:

  • When calling a macro with the wrong number of arguments, Wesnoth tells the number it expected, and the number it got, and at which line number it was instantiated. However, it would be helpful if it would also tell the line number of the definition of the macro. This might be helpful if someone is redefining macros.
  • For places where a standard unit filter is expected, if one is not found, the game should point out a problem. For places where such a filter is expected but [filter] child should not appear, if one does it should report an error and a line number. Many users have a hard time with this kind of thing.
  • When doing scenario transitions in a campaign, if the side definitions don't match up exactly the game tends to give unintelligible error messages. For instance, if one is transitioning and there is an AI side which does not have a leader (but it has a starting location in the map) it must have "no_leader = yes" in its [side] tag, or else when the team_builder objects enter stage two, the game will try to create a unit with an empty type, and the constructor of class unit will fail giving the error message "game::game_error tried to create unit with empty type". This really needs to be much better. For instance, giving a line number of a problem, or suggesting that no_leader should be used. (Note that, it is often possible to debug problems like this by turning on --log-debug=team_construction at commandline but I doubt that there are any users that know about this, you would only learn from reading the C++... without such debug info, fixing things like this can literally take hours.) For that matter it's some question why the team_builder doesn't just stop trying to build a unit when it sees it doesn't have enough info...
  • Recursive macros break the game, and not by stack overflow but by exhausting the heap (which usually takes forever on modern OSes and results in memory thrashing before resource starvation). It would be nice if we could catch this and report an error.

Many WML users are students or beginners to programming, so any improvements to WML error reporting are a big help for their learning process -- many veterans would appreciate the extra help as well. In part we need fixits here and there, but more broadly we need a smarter system that can figure out what's really wrong when things go wrong, and give helpful suggestions.


Don't store all events in savefiles

Currently all events in a scenario are stored twice in each savefile (in [snapshot] and it [replay_start]), specially on wml-heavy umc content this can make savefiles quite big, The proposed solution is that events are not stored in savefiles when they are the same as in the scenario/era/modification file (e.g. not dynamically added with actionwml). In detail the savefile should for all events that have an id and are not generated dynamically ([event] actionwml), store dummy events like

[event]
 id=event_id
 is_unchanged=yes
[/event]

in the savefiles (instead of full events), where the event is then read from the scenario/era/modification tag when the scenario is loaded. This should only apply to campaigns/modifications/mp maps/eras that require download (which is usually the case for campaigns but not for mp maps)


See also https://github.com/wesnoth/wesnoth/issues/1512

Multiplayer/replay features

Gold graph

Make a graph feature, presumably in a dialog, that helps depict the history of a Wesnoth match for the benefit of spectators of a live game or replay. For example it could display army value, army + bank value, number of villages tagged, luck swings... This would also be particularly helpful for AI tweaking development, by helping coders identify the AI's weaknesses and strengths in the context of a particular scenario.

A possible nice feature for this purpose would be to allow the user to click on the graph at key points which would trigger the "back to turn" mechanism to jump back in the replay, or automatically play the replay forwards from the beginning to that point... etc.

Related email on dev-talk: http://web.archive.org/web/20170505024430/https://mail.gna.org/public/wesnoth-dev/2014-02/msg00089.html

Automatically link up to wesnothd server on a local network

The feature request was to use ZeroConf technology, if available, to publish info of a running wesnothd instance to other machines on a local network. Then when they are searching to connect to an unofficial server, they won't have to learn the IP address.

The extra code should be guarded with preprocessor flags so that ZeroConf does not become a mandatory build dependency of Wesnoth.

https://github.com/wesnoth/wesnoth/issues/1162

Stock MP chat messages for language-independent communication

Wesnoth has seen a large acceptance by international communities, and many players don't speak English. It would be nice we could have a set of messages that could be chatted, but which will be translated by our translators and displayed always in the current locale on each client, to make it easier to communicate in mp games / on the mp server.

The easy part is adding the messages. They would ideally be stored in a WML file in the core data dir so they can be easily modified and translated like all other mainline WML. The hard part is devising the interaction mechanism so that a player can easily make use of these stock messages in the MP lobby or in game.


GUI2 framework

As of 1.13.1+dev, GUI2's core and framework (including widgets and their APIs) are completely unmaintained. A prospective maintainer would have to be able to understand pretty advanced C++ making abundant use of template-based abstractions (most notably, the event handling code is almost completely implemented this way), multiple inheritance, and polymorphism. There is also some missing functionality (such as combo boxes and modeless dialogs) that the author did not get to implement, as well as work-in-progress functionality (new listbox and tooltip implementations, not enabled by default).

GUI2 themable in-game UI

The "themable" in-game UI refers to the gameplay UI including the sidebar, menu/status bar, and map view. Most of it is not implemented using proper GUI1 widgets at all, except for the various interactive buttons, menus (which are floating GUI1 listboxes), and the command and chat input boxes (floating GUI1 textboxes).

Moving the theme UI to GUI2 would probably require finishing up theme support in GUI2 (which is largely incomplete), and may benefit from a rendering engine redesign as is also required for porting the game to SDL 2; in particular so that the GUI aspects are more clearly separated from the game board rendering aspect.

Note: This task is here solely for the sake of completeness, and only somebody very well versed in the intricacies of Wesnoth's game rendering code and GUI2 should ever try to take it up. (And even then, I would not want to be anywhere near that person when they inevitably break down and fling one or more tables around upon realizing the sheer complexity of the task. -- Iris)

Add-ons server and client

Passphrase hashing

The add-ons server (campaignd) uses a very dumb authentication scheme for uploading add-ons where an author sets a passphrase (or gets a random passphrase assigned by the game) the first time they upload to the server, and subsequent uploads of the same add-on are only allowed if the passphrase matches. The passphrase is stored in clear text form both client and server-side, which has various implications.

Ideally, the server would store all passphrases in a hashed form.

Port redirection

Wesnoth's MP server (wesnothd) uses a single port (15000) for servicing most requests and redirects clients to different ports according to the game client's version number. This allows the server administrators to reassign ports freely without having to modify the game client.

The add-ons server (campaignd) and client instead have a hardcoded default port number for a Wesnoth version series. For example, 1.12.x is hardcoded to default to 15006. This becomes a maintainability issue as add-on servers get decommissioned and their port numbers can't be reused for fear of misdirecting obsolete client versions to the wrong instance with incompatible add-ons.

Multiplayer server and client

Improve server WML processing

The server uses its own custom WML implementation separate from the main engine's to store and process WML objects for games -- see WesnothdDesign#simple_wml. This is intended to improve performance and reduce wesnothd's memory footprint with large numbers of games and complex scenarios. However, the simple_wml code sometimes messes up WML attribute translatability, resulting in MP scenarios/campaigns being untranslated for non-hosts in networked MP (https://github.com/wesnoth/wesnoth/issues/1420). Fixing this is not easy due to the aforementioned performance requirements.

WML-related features

Game Information

  • [query_location] - queries a location from the user
    • variable
    • [filter_location]

Regarding [query_location]: probably a better name would be choose_location. This is used when a wml event is running and needs to get a target location hex from the user. For example, you right click on a catapult unit and choose the menu item "fire Catapult." Now a [message] says to click on any target within 5 hexes. Now [choose_location] is encountered and the mouse cursor changes to a target sign (possibly customizable). If the user's mouse drifts outside of the allowed locations it changes to a cancel icon. If the operation is cancelled then the variable is cleared and no location stored. --Sapient

This can be implemented in lua by using wesnoth.game_events.on_mouse_action and wesnoth.syncronize_choice

https://github.com/wesnoth/wesnoth/issues/2325

This page was last edited on 6 June 2024, at 20:08.